Nail polish can be a limited quantity item. A polish that's flammable is a hazardous material in transport, and USPS defines a limited quantity as the maximum amount of a specific hazardous material that's exempt from DOT labeling or packaging requirements (Publication 52, section 332, checked November 2026). In practice that means small bottles can travel by ground in a marked box. Whether your polish qualifies depends on its flashpoint and the size of the bottle.

Is nail polish hazmat?

Some of it is, and USPS's wording is that some nail polishes, thinners and acetone-based removers are flammable and may be classified as hazmat (USPS's hazmat shipping page, checked November 2026). A classic polish is pigment in a solvent base, and the solvent is the part that burns. Water-based formulas are built differently, so the product type alone doesn't tell you much.

What decides it is the flashpoint, the lowest temperature at which the vapor above a liquid can catch fire. In USPS's rules a flammable liquid has a flashpoint of not more than 140°F, and a combustible liquid has one above 140°F and below 200°F. A liquid with a flashpoint above 200°F isn't regulated as a hazardous material, provided it has no characteristics of another hazard class (Publication 52, section 343, checked November 2026).

Finding that number is the shipper's job. USPS says that if the nail polish you want to mail is flammable, you're responsible for knowing its flashpoint and toxicity (USPS shipping restrictions, checked November 2026). You'll find the flashpoint on the safety data sheet, or SDS, which your manufacturer or filler should be able to send you for every formula. Our guide to hazmat screening for beauty productsShipping beauty products: what hazmat screening means for aerosols and perfume.Aerosols, perfume and nail polish usually ship as limited quantity hazmat by ground. Classify each SKU from its safety data sheet before the first label. covers how to read one and how to screen a whole catalog, so we won't repeat that here.

Is nail polish remover hazmat too?

Remover needs a separate look, because acetone sits at the far end of the scale. USPS says acetone normally has a flashpoint of 0°F, and it doesn't accept any flammable liquid with a flashpoint of 20°F or below. Acetone is nonmailable unless it's diluted with less flammable or nonflammable materials enough to raise the flashpoint to 20°F or higher (Publication 52, section 343, checked November 2026).

So a bottle of pure acetone and a remover that's acetone cut with other ingredients can land on opposite sides of that line, and only the SDS for the exact formula tells you which side. Non-acetone removers use other solvents with flashpoints of their own. Don't assume a remover ships the way your polish does.

If you sell nail glue, read USPS's entry on glues the same way: glues have a wide range of flashpoints, flammable glues may be mailed if they're a consumer commodity, and some glues may only be sent by ground (USPS shipping restrictions, checked November 2026).

What does 'limited quantity' mean?

It's an exception in the DOT's hazardous materials rules for small containers. For flammable liquids, limited quantities are excepted from labeling requirements unless the package goes by aircraft, and from the specification packaging requirements when they're packed in combination packagings the way the rule describes (49 CFR 173.150(b), in the edition of October 1, 2025, checked November 2026). A combination packaging is inner containers, your bottles, inside an outer box.

The same paragraph sets the sizes for transport other than by aircraft. Inner packagings can't be over 0.5 liters each for flammable liquids in Packing Group I, 1.0 liter in Packing Group II, and 5.0 liters in Packing Group III and for combustible liquids, each packed in a strong outer packaging. The package can't exceed 30 kg (66 pounds) gross weight (49 CFR 173.150(b), checked November 2026). The packing group rates how dangerous the liquid is, with I the most dangerous, and you'll usually find it in the transport section of the SDS.

Say your bottle holds 15 ml. That's 0.015 liters, so the DOT's container sizes leave a lot of room for a retail bottle of polish. Carriers then add conditions of their own.

USPS is a good example. Under its rules only certain hazard classes and divisions are eligible to ship as a limited quantity (Publication 52, section 332, checked November 2026). Its limited quantity surface classification is intended only for domestic surface use and is prohibited for international mail, and those materials generally must also qualify as a consumer commodity to be permitted in the postal network (Publication 52, section 336, checked November 2026). The beauty hazmat guideShipping beauty products: what hazmat screening means for aerosols and perfume.Aerosols, perfume and nail polish usually ship as limited quantity hazmat by ground. Classify each SKU from its safety data sheet before the first label. explains that term.

What changes when polish ships as a limited quantity?

Three things change: the services you can use, the mark on the carton, and the size of each inner container. Start with the services. For flammable liquids USPS prohibits international mail and domestic mail by air, and allows domestic surface transportation when the liquid has a flashpoint above 20°F, qualifies as a limited quantity surface material and meets the criteria in its exhibit (Publication 52, section 343, checked November 2026). Limited quantity surface materials are also prohibited in Priority Mail Express and Priority Mail (Publication 52, section 336, checked November 2026).

Next is the mark. A surface package of a mailable flammable liquid must carry an approved DOT limited quantity surface marking on the address side. The proper shipping name and the identification number aren't required, and neither is a shipping paper (Publication 52, section 343, checked November 2026). The mark is a diamond with black top and bottom portions and a white or contrasting center. Each side must measure at least 100 mm, or no less than 50 mm where the package size requires a reduced mark (Publication 52, section 325, checked November 2026).

The label data changes too. USPS says mailers must identify whether a shipment contains hazardous materials when they generate the label (Publication 52, section 323, checked November 2026). If your store or your 3PL prints USPS labels, ask where that flag gets set for each SKU.

Third, USPS sets the size of each container, and the total liquid in one mailpiece, by flashpoint, in Packaging Instruction 3A and Packaging Instruction 3B, checked November 2026. A glass polish bottle counts as a nonmetal container.

USPS limits for mailing flammable and combustible liquids, by flashpoint (Publication 52, section 343 and Packaging Instructions 3A and 3B, checked November 2026)
Flashpoint on the SDSCan it be mailed?Container limit
20°F or belowNot acceptable for mailingNone, because it can't be mailed
Above 20°F but not more than 73°FDomestic mail by surface transportation only, with restrictionsNonmetal up to 1 pint, metal up to 1 quart, and the same totals per mailpiece
Above 73°F but less than 100°FDomestic mail by surface transportation only, with restrictionsNonmetal up to 1 quart, metal up to 1 gallon, and the same totals per mailpiece
At least 100°F but not more than 140°FDomestic mail by surface transportation only, with restrictionsNonmetal up to 1 quart, metal up to 1 gallon, and the same totals per mailpiece
Above 140°F but not more than 200°FDomestic mail by air or surface transportation, with restrictionsUp to 1 gallon, and 1 gallon in total per mailpiece
Above 200°FNot regulated as a hazardous materialGeneral packaging rules, packed securely to prevent leaks

The total per mailpiece is the line to watch on big orders and sets. Say an order is 20 bottles of half a fluid ounce each. That's 10 fluid ounces, which is under a pint. Say it's 40 bottles instead. That's 20 fluid ounces, and if the polish is in glass with a flashpoint above 20°F and not more than 73°F, it's more than the pint USPS allows in one mailpiece.

Instruction 3A also covers how the bottle is closed and packed for flashpoints above 20°F and below 100°F. The primary receptacle must have a screw cap with at least one and a half turns, soldering clips or another means of secure closure, and friction tops aren't acceptable. Enough cushioning must surround the bottles to prevent breakage and absorb any leak, inside securely sealed secondary packaging and a strong outer packaging (Packaging Instruction 3A, checked November 2026). Write those into your packaging standard for each SKUPackaging standards per SKU: the document that stops damage.A packaging standard is a rule saved on each SKU that tells the packer which box, cushioning and orientation it gets, so every order ships the same way..

What about UPS and FedEx?

UPS and FedEx each publish their own hazardous materials terms for ground shipping, and they aren't copies of the postal rules or of each other's. We give no figures for either carrier here. Read the carrier's hazardous materials page for the service you plan to use, or ask your account rep which services take a limited quantity package, what mark it wants on the carton, and what it allows per inner container and per package.

What to give your warehouse before the first order

A warehouse can't classify a formula it has never seen. Send these with your quote request or your SKU list.

  • The safety data sheet for every formula: each polish base, each top coat and base coat, each remover and each glue. Say which SKUs share a formula, since forty shades often share one sheet.
  • The flashpoint from each sheet, in a column on your SKU list, so nobody has to open forty files to find it.
  • The hazard class, the identification number and the packing group from the transport section of each sheet, if the product is regulated.
  • The size of each unit in fluid ounces or milliliters, and what the container is made of: glass, plastic or metal.
  • How many units are in each set, kit or bundle, and the total liquid in it.
  • The largest order you expect, in units, including wholesale and salon orders, so the total per package is checked before one shows up.
  • The carriers and services you offer at checkout today, and which ones you'd like to keep.
  • Whether you sell outside the US, and which SKUs those orders include.
  • How returns reach you now, and which label your store issues for them.

If you sell sets, the kitting guideKitting and bundling at a 3PL: pre-kit, pick-to-kit and what it costs.Kitting builds a sellable unit before it's ordered; pick-to-kit builds it at pack time. When each wins, how Shopify bundles sync, and what it costs at a 3PL. covers how a bundle becomes its own SKU. A set is also its own hazmat question, because the total liquid goes up with every bottle you add.

What to change at checkout, on returns and for orders abroad

Once you know which SKUs ship as a limited quantity, make the store agree with the warehouse. Take the air services off any order that includes one of those SKUs, or say on the product page that it ships by ground.

Returns are the same question in reverse, because a customer sending back polish is shipping a flammable liquid too. Ask your carrier which return label and service it accepts for those SKUs. For orders abroad, USPS's instruction for flammable liquids with a flashpoint above 20°F and below 100°F lists international mail and APO, FPO and DPO addresses as prohibited (Packaging Instruction 3A, checked November 2026). Other carriers set their own rules for each destination, so screen those orders SKU by SKU.

None of this is compliance advice. What your product needs is for your carrier and your own hazmat contact to say, and the SDS is where that conversation starts.

How hazmat screening works at YNK

We ship beauty and haircare in bottles and jars of liquids, creams, oils and foams, and we screen aerosols and alcohol-based products for hazmat before we quote them. Some of those products have to ship as hazmat, usually as a limited quantity by ground. That limits which carriers and services can take them, and it changes the label on the box. So we go through your SKU list before we quote, flag each product that falls into that group, confirm the service that will carry it, and price it in. If you're not sure about a product, send us its safety data sheet.

Hazmat SKUs ship on the services that accept them, set in your quote. Orders in by noon Eastern (12pm ET) ship the same business day. Anything later goes out the next business day, or within two to three business days during peak. Ground reaches New York, New Jersey, Pennsylvania, New England and the DC area in 1 to 2 business days, and it's about 5 business days coast to coast. More is on the beauty and haircare fulfillment pageBeauty and haircare fulfillmentBottles and jars, hazmat screening for aerosols and alcohol-based products; Noun ships from here..

Our estimated rates are $3.00 per order for handling and $0.65 per cubic foot per month for storage, with no seasonal or peak surcharges on handling or storage, and we confirm your exact rates in your quote. Postage is billed semi-monthly per shipment. To start, fill in the 3PL intake, which takes about ten minutes. Someone from the team replies within one business day, and the proposal follows within five.

Questions founders ask about shipping nail polish

Is nail polish a limited quantity item?

It can be. A flammable polish is a hazardous material, and in retail-size bottles it may qualify for the limited quantity exception, which lets it travel by ground in a marked box. The flashpoint on the safety data sheet and the size of the bottle decide whether yours does.

Can I ship nail polish by Priority Mail or by air?

A flammable polish can't go by either at USPS. It prohibits flammable liquids in domestic mail by air and in international mail (Publication 52, section 343, checked November 2026), and it prohibits limited quantity surface materials in Priority Mail Express and Priority Mail (section 336, checked November 2026).

Can I mail acetone nail polish remover?

It depends on the formula's flashpoint. USPS doesn't accept flammable liquids with a flashpoint of 20°F or below, and says acetone normally has a flashpoint of 0°F and is nonmailable unless it's diluted enough to raise the flashpoint to 20°F or higher (Publication 52, section 343, checked November 2026).

What goes on the box for a limited quantity shipment?

At USPS, a surface package of a mailable flammable liquid carries the DOT limited quantity surface marking on the address side. The proper shipping name, the identification number and a shipping paper aren't required (Publication 52, section 343, checked November 2026).

More guides

Related

Send us your SKU list and the safety data sheets.

Tell us your monthly orders, your channels, and which SKUs are aerosols or alcohol-based, with safety data sheets if you have them. Someone from the team replies within one business day, and the proposal follows within five.