At receiving, a 3PL checks your shipment in at the dock, counts it against your packing list, scans the units against your SKU list, records anything short, extra or damaged, and puts the stock on the shelf so it can sell. It's billed per pallet, per carton, per unit or by the hour, depending on the 3PL. When it's by the hour, the bill follows how the shipment was packed, and that part is up to you.

This guide follows one shipment through the building and shows where the hours go. For how to pack and label that shipment before it leaves, read how to send inventory to a 3PLHow to send inventory to a 3PL so receiving takes fewer hours.Send the SKU list first, one SKU per carton, labeled cartons, a packing list on the pallet and notice before it lands. At YNK receiving is billed hourly..

The seven steps of 3PL receiving, from the dock to the shelf

Warehouses name the steps differently, but the order is nearly always the same. Each step hands a cleaner count to the next one, and for each there's something you can do, days earlier, that makes it shorter.

The receiving steps, what the warehouse does at each one, and what shortens it
StepWhat the warehouse doesWhat shortens it
Notice and appointmentReads your advance notice (often called an ASN, an advance ship notice), books a dock slot and plans people for it.Send the notice and the packing list before the truck is booked, and say so if the date moves.
Check-in at the dockUnloads the truck, counts pallets and cartons against the bill of lading (the carrier's paperwork for the load) and looks for visible damage before signing for it.A bill of lading that matches the packing list, and pallets wrapped so they arrive square.
Carton countSorts the cartons by SKU and counts them against the packing list.One SKU per carton, a label on every carton, and the same count in every full carton.
Unit scanOpens the cartons and scans units against your SKU list, so each barcode is tied to the right item in the system.The SKU list sent ahead, with one barcode that scans for every variant.
ExceptionsRecords what's short, extra, damaged or unknown, takes photos, and sets those units aside.One person on your side who answers the same day.
Lot and expiryFor dated goods, records the lot number and the expiry date against the units.Lot and expiry printed on the carton and listed on the packing list.
Put-awayMoves the units to a bin or shelf location and confirms the count there. From then on the stock can sell.Dimensions and units per carton in the SKU list, so a location can be chosen before the stock arrives.

What happens at the dock door

Receiving starts before the truck does. A warehouse that receives by appointment plans its dock and its people from the notices it's been sent, so a shipment that was announced usually gets a slot, and one that wasn't waits for a gap. If you're sending parcels and no pallet, there's no appointment to book. The notice still matters, because cartons that arrive over several days have to be matched to one shipment.

When the truck backs in, the first count is the coarse one: pallets and cartons against the bill of lading. The driver needs a signature on the delivery receipt before leaving, so the team first checks what can be seen from outside, such as a crushed corner, torn wrap, or a carton count that's one short. Ask your 3PL whether it writes visible damage or a short count on the delivery receipt before it signs, and whether it takes photos. If you file a claim with the carrier later, those notes and photos are the record you'll want. What's inside the cartons is the next count.

Counting, scanning and putting the stock away

The carton count comes next, against your packing list, SKU by SKU. When every carton holds one SKU and says so on its label, this step is a walk around the pallet with a scanner. When cartons are mixed or unlabeled, each one has to be opened and sorted before anyone can count it, and the sorting can take longer than everything else put together.

Then come the units. In a warehouse that receives by scan, a unit's barcode is scanned against your SKU list, so the system knows which item it is and the count builds from scans, with nobody typing numbers in. It's why the SKU list has to arrive first. A barcode the system has never seen stops the scan, and someone has to work out what the item is before the count can go on. A warehouse with no list can only count what it finds. It can't tell you a SKU is missing, because nobody told it to expect one.

Anything that doesn't match is recorded as an exception: short, over, damaged, the wrong item, no barcode. A careful warehouse sets those units aside and doesn't shelve them as sellable until you've said what to do with them. Decide ahead of time who on your side answers. Units in an exception pile are units you've paid to make and can't sell yet.

For goods with an expiry date, the lot number and the date are recorded at this point, so picking can send the oldest sellable lot out first. Our guide to lot tracking and first-expired-first-out pickingLot tracking and FEFO for supplement brands, from receiving to a recall trace.What a lot is, how a 3PL records lot and expiry at receiving, how FEFO picking works and how a recall trace runs. At YNK we record the lot at the dock. covers that part.

Put-away is the last step, and it's the one your store feels. The units go to a bin or a shelf location, the location is scanned, and the count in the warehouse management system (the WMS) goes up. Until then the stock is in the building and can't be sold. The time from the truck's arrival to that moment is called dock-to-stock time, and it's the figure to ask any 3PL for.

When receiving is done, you should get a report you can check against what you sent. Ask what yours will contain before the first shipment leaves, so you aren't asking for it afterwards.

  • The count received for each SKU, next to the count your packing list said to expect.
  • Each exception by SKU, with what was found and a photo where there's damage.
  • Lot numbers and expiry dates as they were recorded, for dated goods.
  • The date the shipment arrived and the date the last unit was put away.
  • If receiving is billed by the hour, the hours this shipment took.

Why receiving is often billed by the hour

A 3PL can bill receiving per pallet, per carton, per unit or by the hour, and 3PL pricing models3PL pricing models: what each billing unit does to your invoice.Handling per order, item or pick, storage per pallet, bin or cubic foot, what each does to your bill, and a worked table at an estimated $3.00 per order. compares the units. A flat price per pallet or per carton is easy to forecast. It also has to cover the slow pallets along with the quick ones, so a brand that ships clean pallets pays the same as one that doesn't. A quote with a flat price can still carry a separate line for sorting or relabeling, so ask.

Hourly billing charges for the time your shipment took. Two shipments with the same units in them can take very different hours, and you choose which one you send. Say you ship 2,000 units on two pallets, one SKU to a carton, every carton labeled, with a packing list that matches, and two people receive them in an hour. Say the same units arrive in mixed cartons with no labels, every carton has to be opened and sorted before the count can start, and the same two people are on it for most of the day.

The trouble with an hourly line is that you weren't there to see the clock. So ask for the hours by shipment on the invoice, with the date and a note on anything beyond the plain count. How to read a 3PL invoiceHow to read a 3PL invoice, and the three checks to run every month.Every line on a 3PL invoice should move with something you can count: orders, cube, parcels or hours. How to match each one, and three checks for every month. shows what the receiving line should move with, and the hidden 3PL fees checklistHidden 3PL fees: where each one hides, and the question that finds it.The fees that sit outside a 3PL's headline rates, where each one hides, the question that finds it, and what's on the bill at YNK, starting with no setup fee. lists the charges that can sit beside it.

What slows receiving down

A slow receipt has usually gone wrong before the truck was loaded. These are the common causes, roughly in the order the dock meets them.

  • The dock wasn't told the truck was coming, so the shipment waits for a slot and for people.
  • The SKU list arrives after the stock, so items have to be created from the product in hand.
  • The cartons are loaded loose in a truck or container with no pallets under them, so they come off by hand, one at a time.
  • Cartons are mixed or unlabeled, so every one of them is opened and sorted before it's counted.
  • The packing list describes the purchase order and the shipment turned out differently, so each difference becomes an exception that someone has to chase.
  • Barcodes are missing, shared between two variants or won't scan, so units have to be relabeled, which is usually billed as separate labor.

How to make a pallet quick to receive

The packing rules are in how to send inventory to a 3PLHow to send inventory to a 3PL so receiving takes fewer hours.Send the SKU list first, one SKU per carton, labeled cartons, a packing list on the pallet and notice before it lands. At YNK receiving is billed hourly.. This is the short version, as a check to run before the truck is booked. Each line takes a stop out of the steps above.

  • The SKU list reached the warehouse before the stock left, with a barcode, dimensions and units per carton for every variant.
  • Every sellable unit carries a barcode that scans, and no two variants share one.
  • Each carton holds one SKU, and every full carton of that SKU holds the same count.
  • Each carton is labeled on two sides with the SKU, the variant and the quantity.
  • The packing list describes this shipment, pallet by pallet, with a total for each SKU.
  • Dated goods show the lot and the expiry date on the carton and on the packing list.
  • The warehouse has the arrival date, the carrier, the tracking number and the pallet and carton counts.
  • Someone on your side is named to answer questions on the day it lands.

What to ask a 3PL about receiving

You'll learn more from these than from the receiving rate alone. Listen for a figure and a method in each answer.

  • How is receiving billed, and if it's by the hour, will the invoice show the hours for each shipment?
  • What's your dock-to-stock time for a labeled pallet with a packing list, and how do you measure it?
  • Is every unit scanned, or do you count cartons and trust the label?
  • How will I hear about a shortage, an overage or damage, and how soon?
  • What happens to units with no barcode, and what does labeling them cost?
  • When does my stock show as sellable: as each unit is put away, or once the whole shipment is closed?

Questions to ask a 3PLQuestions to ask a 3PL before you sign, and what a good answer sounds like.Grouped by what each answer tells you: accuracy, cutoff and SLA, billing units, receiving, returns, exit. Ours: 12pm ET cutoff, under 0.3% error. has the rest of the list, and inventory counts and shrink3PL inventory accuracy: how the counts work and what to ask about shrink.A 3PL keeps inventory accurate with scans at receiving and pick, blind cycle counts and a variance report, with shrink measured against one agreed count. explains how the count is kept right once the stock is on the shelf.

Receiving at YNK, and how it's billed

Your inventory comes to 465 Mola Blvd, Dock 10, Elmwood Park, NJ 07407, and the receiving dock is open Monday to Friday, 9am to 6pm ET. We count your inbound stock, scan it onto the shelf and put it away. Every unit gets scanned as it goes on the shelf, so look-alike variants never share a bin, and cycle counts keep the number on your dashboard equal to the number on the shelf. You see the same live inventory we see, by SKU, in the dashboard. Supplements, gummies, beverage and food-grade goods are tracked by lot and expiry dateSupplement fulfillmentLot and expiry recorded at receiving, first-expired-first-out picking, Makks gummy vitamins., and we pick the oldest sellable lot first.

Receiving is billed by the hourPricingOur estimated rates are $3.00 per order for handling (pick, pack and ship), $3.00 per returned parcel, $0.65 per cubic foot per month for storage, and $35 an hour for special projects like relabeling., and the hours go on your invoice. The rate is confirmed in your quote. A labeled shipment with a packing list takes fewer hours than a mixed pallet without one. If your product arrives without a barcode that scans, we label it before it goes to stock, billed as special-project labor, an estimated $35 an hour. There's no setup fee.

We map your SKUs and shipping rules into the WMS before the trucks move, and scan everything onto the shelf as it arrives. Found's switch ran that way. When its pallets landed, every unit was scanned straight to the shelfFoundFound changed 3PLs and was fully onboarded, inventory received and orders shipping, in a single weekend., so the stock was sellable the moment it was put away, and Found went from inbound to shipping live orders in a single weekend. Most brands are live in under two weeks.

To have receiving quoted with everything else, send the 3PL intake. It takes about ten minutes and asks for your SKU list with sizes and weights and a rough inbound plan. Someone from the team replies within one business day, and the proposal follows within five. Receiving and storageServicesReceiving, pick and pack, kitting, returns, FBA prep, cross-border DDP, wholesale with EDI and subscription boxes. says more about the warehouse, and the pricing FAQFAQ: Pricing & billing10 questions, answered in the first sentence. covers what receiving costs.

Questions founders ask about receiving

How long does 3PL receiving take?

It depends on how the shipment was packed and whether the warehouse knew it was coming. A labeled pallet with a packing list and a SKU list on file is the quick case, and a mixed, unlabeled one is the slow case. Ask each 3PL for its dock-to-stock time and how it's measured.

What is dock-to-stock time?

Dock-to-stock time is the time from a shipment's arrival at the warehouse to the moment its units are on a shelf and can be sold. It takes in check-in, counting, scanning, exceptions and put-away, so it's a useful single measure of how receiving runs.

What happens if the count doesn't match my packing list?

The warehouse records the difference as an exception, by SKU, and tells you. What arrived is what goes into stock, and the gap is yours to settle with your supplier or the carrier. Photos from the dock and a packing list by carton make that conversation shorter.

Can I sell stock before receiving is finished?

Often you can. In a warehouse that scans units to a shelf location, a unit can sell once it's put away, even while other cartons from the shipment are still being counted. Some warehouses release stock only when the whole shipment is closed, so ask which way yours works.

More guides

Related

Send us your inbound plan with your quote request.

Tell us what you sell, your monthly orders, and roughly what's arriving and when. Someone from the team replies within one business day, and the full proposal follows within five.